Currency Displayed in
The EasyShoe 3D is a composite glue-on horseshoe designed for track and arena sports. The EasyShoe 3D is integrated with frog support by 3D HoofCare and finger tabs for easy gluing.
Stand the horse in the horseshoe and apply the tabs using EasyCare Maxi-Cure Glue. Super Glue will hold strong for a full trim cycle and dries in about 10 minutes. No welding required.
Available in both front and hind patterns.
Sold in pairs.
Front shoe size | Width (inches) | Length (inches) | Width (mm) | Length (mm) |
---|---|---|---|---|
118 | 4 3/8 - 4 5/8" | 5" | 112-118mm | 128mm |
122 | 4 9/16 - 4 13/16" | 5 3/16" | 116-122mm | 132mm |
126 | 4 3/4 - 4 5/16" | 5 3/8" | 120-126mm | 136mm |
130 | 4 7/8" - 5 1/8" | 5 1/2" | 124-130mm | 140mm |
134 | 5 - 5 1/4" | 5 10/16" | 128-134mm | 145mm |
Hind shoe size | Width (inches) | Length (inches) | Width (mm) | Length (mm) |
---|---|---|---|---|
110 | 4 1/8 - 4 3/8" | 4 7/8" | 104-110mm | 124mm |
114 | 4 1/4 - 4 1/2" | 5" | 108-114mm | 128mm |
118 | 4 3/8 - 4 5/8" | 5 1/4" | 112-118mm | 133mm |
122 | 4 9/16 - 4 13/16" | 5 3/8" | 116-122mm | 137mm |
126 | 4 3/4 - 4 15/16" | 5 5/8" | 120-126mm | 142mm |
All measurements are approximate.
Suggested tools and materials:
Recommended glue to use:
You may also need: