Borium bullets

Borium bullets for adding traction to horseshoes.

The borium is contained inside each copper 'bullet'. 

Heat the toe of the shoe in a forge, remove the shoe, then use your wire brush to remove scale from the toe. Sprinkle the flux on the toe and place the bullet. Sprinkle a little more flux over the bullet and place the toe back in the fire. Wait until the Borium Bullet collapses. At the very second the bullet completely collapses, remove the shoe from the forge and hold it level for 5 to 10 seconds. Reverse the shoe to do the same procedure on both heels at the same time.

Sold by the pack containing 48 borium bullets.

Pack contains.

• 16 Toe Bullet Pieces 1"
• 32 Heel Bullet Pieces 3/4"
• 75 Grams Brazing Flux.